EFUGY

View Original

Comparing Creality Boards

EFUGY 3D

Creality V4.2.2 Board:

The Creality V4.2.2 board is a popular 3D printer board used in Creality 3D printers, such as the Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, and CR-10 series. The board color is typically black or dark blue.

Some unique features of the Creality V4.2.2 board include the following:

  • Silent stepper motor drivers (TMC2208 or TMC2209) significantly reduce the printer's noise during operation.

  • Supports 24V power supply, allowing quicker bed and hot end heating.

  • Integrated bootloader, making firmware updates easier.

  • Overcurrent and thermal protection to prevent damage to the board and connected components.

Creality 2.1 Board:

The Creality 2.1 board is an older version, often found in the CR-10 and CR-10S series 3D printers. The board is typically green in color.

Some unique features of the Creality 2.1 board include the following:

  • A4988 stepper motor drivers are louder than the TMC drivers found on the V4.2.2 board.

  • Supports a 12V power supply, which may result in slower heating times compared to the 24V supported by the V4.2.2 board.

  • Firmware updates may require additional hardware, such as an Arduino or USB programmer.

Creality V1.1.4 Board:

The Creality V1.1.4 board is another older version used in Ender 3 and Ender 3 Pro 3D printers. The board color is typically green.

Some unique features of the Creality V1.1.4 board include the following:

  • A4988 stepper motor drivers, similar to the Creality 2.1 board, are louder than the TMC drivers found on the V4.2.2 board.

  • Supports a 24V power supply, providing quicker heating times compared to the 12V supported by the Creality 2.1 board.

  • Firmware updates may require additional hardware, such as an Arduino or USB programmer.

The Creality V4.2.2 board is the most advanced and versatile option, with better stepper motor drivers, improved thermal and overcurrent protection, and more accessible firmware updates. The Creality 2.1 and V1.1.4 boards are older and less advanced, but they may still be suitable for specific applications or users looking to maintain or modify older Creality 3D printer models.