Manufacturer Beta printer profile
QREATTE Slice1 with EFUGY 3D Slicer
The Version 3 Slice1 Manufacturer Beta profile includes 120 mm/s print and 200 mm/s travel defaults, plus direct support for the factory Moonraker v0.8 connection.
The profile is available now. The factory Moonraker connection, Files, and Fluidd provide practical transfer paths.
Profile starting point
A compact Klipper profile with clear starting settings.
The profile is ready to preview and adjust for the machine in front of you.
- Printer
- QREATTE Slice1
- Profile state
- Manufacturer Beta
- Build volume
- 120 × 120 × 120 mm
- Starting nozzle
- 0.4 mm
- Default print
- 120 mm/s
- Default travel
- 200 mm/s
Profile refinements introduced in 3.2
Cleaner handoff and fewer unnecessary moves.
The profile improves the END_PRINT handoff, reduces unnecessary sparse-infill retractions, and uses the printer’s START_PRINT and END_PRINT macros.
Profile-specific motion
The included starting profile uses 120 mm/s print and 200 mm/s travel defaults for the Slice1 workflow.
Klipper macros
Review the printer’s START_PRINT and END_PRINT expectations before the first physical run.
Moonraker v0.8 transfer
Version 3 recognizes the access and upload responses used by the factory environment.
Preview still comes first
Inspect the toolpath and use a raised-nozzle dry run before authorizing a new profile on hardware.
Factory transfer
Factory Moonraker v0.8 response formats now work with EFUGY.
The app supports the older access response and direct upload receipt without requiring a printer-side configuration change.
Before the first print
Start with Preview, then check the machine.
The profile remains Manufacturer Beta. Confirm the printer firmware, nozzle, material, and macro expectations; inspect the G-code; then use a raised-nozzle dry run before a first physical print.