Blue TPU Filament 1.75mm
• Blue TPU Filament
• 1.75mm - 1 KG Spool
• Printing HotEnd Temperature: 220-260°C
• Heat Bed Temperature: 70-80°C
TPU, or Thermoplastic Polyurethane, is a flexible filament commonly used in 3D printing.
• Blue TPU Filament
• 1.75mm - 1 KG Spool
• Printing HotEnd Temperature: 220-260°C
• Heat Bed Temperature: 70-80°C
TPU, or Thermoplastic Polyurethane, is a flexible filament commonly used in 3D printing.
• Blue TPU Filament
• 1.75mm - 1 KG Spool
• Printing HotEnd Temperature: 220-260°C
• Heat Bed Temperature: 70-80°C
TPU, or Thermoplastic Polyurethane, is a flexible filament commonly used in 3D printing.
Here are a few general tips for printing with TPU:
Print at a temperature between 220-260°C, with the hot end at 260°C.
Use a heated bed, if possible, set to 70-80°C.
Use a raft or brim to improve bed adhesion.
Use a cooling fan to improve layer adhesion and reduce warping.
Use a print speed of 30-60 mm/s for best results. (Slower speeds tend to yield higher-quality prints)
Remember that these are just general guidelines; the optimal print settings will depend on the specific printer and filament used. It may be necessary to experiment with different settings to achieve the best results.
Makes:
