Purple PLA Filament 1.75mm
• 1.75mm - 1Kg 3D Printer Filament Spool
• Print Temperature: 195°C - 220°C
• Less Warping
• No Heat Bed Required
• Eco-Friendly
• Ships vacuumed sealed with silica gel desiccant to keep dry and primed for out-of-the-box printing.
• 1.75mm - 1Kg 3D Printer Filament Spool
• Print Temperature: 195°C - 220°C
• Less Warping
• No Heat Bed Required
• Eco-Friendly
• Ships vacuumed sealed with silica gel desiccant to keep dry and primed for out-of-the-box printing.
• 1.75mm - 1Kg 3D Printer Filament Spool
• Print Temperature: 195°C - 220°C
• Less Warping
• No Heat Bed Required
• Eco-Friendly
• Ships vacuumed sealed with silica gel desiccant to keep dry and primed for out-of-the-box printing.
Here are a few general tips for printing with PLA:
Print at a temperature between 180-220°C, with the hot end at 220°C and the bed at 60°C.
Use a brim or raft to improve bed adhesion.
Use a cooling fan to improve layer adhesion and reduce warping.
Use a print speed of 30-60 mm/s for best results.
Remember that these are just general guidelines; the optimal print settings will depend on the specific printer and filament. It may be necessary to experiment with different settings to achieve the best results.
Makes:
