Community Beta printer profile
Easythreed K10 with EFUGY 3D Slicer
Version 3 includes a compact K10 starting profile for PLA and TPU workflows using removable media.
The profile is available now and still needs a careful first print on each machine.
Profile starting point
A compact printer rewards careful placement.
The K10’s compact workspace makes original-size review and rotation especially useful before any scaling decision.
- Printer
- Easythreed K10
- Profile state
- Community Beta
- Build volume
- 100 × 100 × 100 mm
- Starting nozzle
- 0.4 mm
- Bed
- Unheated
- Profile materials
- PLA and TPU
First K10 workflow
Check the size before the settings.
Use a familiar, small model while you confirm the profile against your exact machine.
- 01Select Easythreed K10
Confirm the 100 mm build volume and 0.4 mm nozzle match the printer in front of you.
- 02Import and rotate
Review the original dimensions. Try orientation changes before choosing Fit to Printer.
- 03Choose PLA or TPU for the job
Compare the profile with the material manufacturer’s guidance and the limits of an unheated bed.
- 04Preview and export
Inspect the full toolpath, then use the printer’s removable-media workflow for the first test.
First K10 print
Physical K10 results are not yet published.
Version 3 includes the K10 profile, but no public physical-print result is attached yet. Start with a small familiar model.
Compact printer workflow